10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall Mount Solar Battery
The Advantages of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
1. High Energy: 10KWh energy storage, can meet 1-2 days electricity usage of Home.
2. Bank-up function: no need worry of out of electricity when any emergency situation.
3. Solar system. can work with Solar panels to storage Solar energy. save money and eco friendly
4. Save electricity fee. can adjust electricity usage when high price, and save more money.
5. Long service life: Lifepo4 battery Prismatic cell, can service 3000 times when left 80% energy, that is mean can service 10~15 years when High frequency of use.
6. Safe. Lifepo4 battery has no possibility of explosion when any usage condition, it is very safe to place it in house.
7. Save space . Wall mounted design, don't take up space.
Basic specification of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
| NO. | Item | General Parameter | Remark |
| 1 | Combination method | 15S4P | |
| 2 | Typical Capacity | 200Ah | Standard discharge after Standard charge |
| 3 | Factory Voltage | 49V-51.0V(40-60%) | Mean Operation Voltage |
| 4 | Voltage at end of Discharge | 40-44V | Discharge Cut-off Voltage |
| 5 | Charging Voltage | 53-55V | |
| 6 | Internal Impedance | ≤60mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
| 7 | Standard charge | Constant Current 40A Constant Voltage see No.5 0.02CA cut-off | Charge time : Approx 6 h Limiting current 20A |
| 8 | Standard discharge | Constant current:40A | end voltage see NO.4 |
| 9 | Maximum Continuous Charge Current | 100A | ≥10ºC |
| 10 | Maximum Continuous Discharge Current | 100A | ≥10ºC |
| 11 | Operation Temperature Range | Charge: 0~45℃ Discharge: -20~55℃ | 60±25%R.H. Bare Cell |
| 12 | Storage Temperature Range | Less than 12 months : -10~35℃ less than 3 months: -10~45℃ Less than 7 day : -20~65℃ | at the shipment state |
| 13 | Dimensions | 680*485*180 (220)mm Include Bracket | |
| 14 | Weight | 103KG | |
The BMS function introduction of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
1. The BMS is designed for 15/16 series lithium battery.
2. The BMS have all functions which are :
overcharge detection function
over discharge detection function
over current detection function
short detection function
Temperature detection function
balance function
communicate function
Alarm function
Total capacity function
Storage history function
Detail Pictures of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
Case Stracture of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
There shall be no such defect as scratch, bur and other mechanical scratch, and the connector
should be no rust dirt. The structure and dimensions see attached
It has RS232 /RS485 and canbus standard communication interface, it can real-time monitoring the capacity of battery bank, the voltage, current, environment temperature, and charging/discharging current.
It support most of Inverter on the market, just let us know your inverter brand to confirm.
The connection image of RS485 Parallel Communication
While in RS485 parallel
communication, dial-up addresses of battery module are 1,2,3,4……14,15; By this method,
we can be allowed to
read each data depending on battery module. Any battery other than address 0 can be
connected to the host computer; FF polling mode used
Address Switch function ( only in Parallel)
The Package of 10KW Lifepo4 Battery For Home Energy Storage Power Storage Wall
The Wooden package of 4 sets
The Wooden package of 6 sets
FAQ
Q1: Before order, can I have samples for testing?
A: Yes, we can provide you samples for testing firstly.
Q2: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q3: How to proceed an order?
A: 1. Contact our service & let us know your requirements or application.
2. We quote according to your requirements or our suggestions.
Q4: What kind of environment should lithium batteries store?
A: -40°C~50°C, 65±20%RH storage for a long time(>3 months)
and the storage condition shall be:<35°C , 65±20%RH
Q5: What is MOQ?
A: Low MOQ, 1pc for sample checking is available.
Product Tags:
|
|
10KW lifepo4 Battery For Home Energy Storage Power Storage Wall mount solar battery Images
|
